Cavity Brick Wall Insulation
Ceiling 2 in 1 (Nail-up Ceiling Thermal Insulation)
Cellulose Fibre.Blow-in Insulation
Cold Insulation Industrial
Cool Roof Coatings (External Application)
Composite Bulk Insulation
Down Lighters & Electrical Fittings
Expanded Polyethylene (EPE)
Expanded Polystyrene (EPS)
Extruded Polystyrene (XPS)
Glass Wool Insulation
Hot Insulation (Industrial)
Phenolic Foam Insulation
Polyester Fibre (Flexible Blanket)
Polyester Fibre (Rigid Board)
Reflective Foil Laminates
Roof Insulation (Industrial)
Roof Systems & Spacers
Spray Foam Insulation
Provide vapour and moisture barriers to prevent condensation. Vapour barriers include polythene sheet, reflective foil, foil backed plasterboard and well maintained water resistant painted surfaces. Water resistant insulation such as polystyrene can also act as a vapour barrier. Tape or glue all joints in vapour barriers to keep out moisture and ensure that there are no tears or pinholes or damage in the membrane.Use vapour barriers to protect from condensation:
- In hot humid (tropical) climates.
- In cool climates where the difference between indoor and outdoor temperature is significant.
- In roof spaces with a low ventilation rate, for example cathedral or raked ceilings.
- In situations where high amounts of vapour are generated and not exhausted.
- On the underside of metal roofing, to minimise the likelihood of corrosion, surface mould, decay of wood based materials, hydration of plastics, etc.
In cold climates place the vapour barrier on the inside of the insulation (directly above the ceiling lining and next to the internal wall lining).
In warm climates place the vapour barrier on the outside of the insulation. In hot humid climates it is ideal to have bulk insulation with a double sided vapour barrier. The top vapour barrier can be installed on site.
Note: The above is a very wide rule of thumb approach and a general design guide, for more critical design each application must be considered on its own merits and may require professional advice input.
Use perforated reflective foil in walls and under mezzanine floors when building with porous materials. The perforations prevent water droplets from penetrating but allow vapour through so that the insulation can dry if it does somehow get wet. This prevents rotting behind weatherboards or under timber floors, for example.